User`s guide

Chapter 13 Store and Recall RIGOL
DS1000Z User’s Guide
13-5
Internal Storage and Recall
Internal storage and recall support “Setups” in Storage. In the following part, the
storage and recall methods and procedures are introduced.
1. Save the specified oscilloscope setting in internal memory.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press Storage  Storage to select “Setups”, press Save and use to
select “Local Disk” (displayed with blue shading). Then press down to
open the local disk.
3) Press New File to creat a file name using the pop-up keyboard and for
specific operations please refer to the instruction of “
To Create a New File
or Folder
”. If the internal memory already contains a file in this type, use
to select the file and Save and Delete are illuminated; at this point, you
can press Save to execute the saving operation and the original file will be
overwritten, or you can press Delete to delete the original file. Use to
select
and then press down to return to the previous directory.
2. Load the specified type of file in internal memory.
1) Press Storage  Storage to select “Setups” and then press Load and use
to select “Local Disk”. Then press down to open the local disk.
2) If the internal memory contains files in this type, use
to select the
desired file to load and press Load to load the file selected.