User`s guide

RIGOL Chapter 13 Store and Recall
DS1000Z Users Guide
13-4
external memory in a single “.csv” file. You can specify the file name and the
storage directory and save the corresponding parameter file (.txt) under the
same directory using the same file name. The function of this parameter file is
the same as that ofParameters
. The recall of CVS and parameter files is not
supported.
After selecting this type:
Press DataSrc to select “Screen” or “Memory. After selecting “Memory, press
Channel to select the desired channel (note that only channels currently
enabled can be selected).
Press Param to enable or disable the parameter save function.
6. Parameters
Save the waveform parameters displayed on the screen in external memory in
“.txt” format. The parameters include the current system information (such as
the model, firmware version and software version) and the current relative
settings information of the instrument (such as the vertical system, horizontal
system, trigger system and channel on/off states).