User`s guide

Chapter 6 To Make Measurements RIGOL
DS1000Z User’s Guide
6-81
1. Select the item
Press Values and use to turn on or off the value to be measured. The
measurement item turned on will be displayed at the upper-left corner of the
screen.
 Turn on the BX-AX and BY-AY measurement items.
 Turn on the dX*dY measurement item.
 Turn on the dX/dY measurement item.
 Turn on the dY/dX measurement item.
 Turn on the absAA and argAA measurement items at the
same time.
 Turn on the absAB and argAB measurement items at the
same time.
 Turn on the absBA and argBA measurement items at the
same time.
 Turn on the absBB and argBB measurement items at the same time.
2. Adjust the cursor positions (Note: you can also press
continuously
to switch the current cursor)
 Adjust cursor AX: press AX and use to adjust the position of cursor AX.
 Adjust cursor BX: press BX and use to adjust the position of cursor BX.
 Adjust cursor AY: press AY and use to adjust the position of cursor AY.
 Adjust cursor BY: press BY and use to adjust the position of cursor BY.
 Adjust cursors AX and BX: press ABX and use to adjust the positions of
cursors AX and BX at the same time.
 Adjust cursors AY and BY: press ABY and use to adjust the positions
of cursors AY and BY at the same time.
The measurement results change accordingly during the adjustment process
and the adjustable range is limited within the screen range.