User`s guide

Chapter 6 To Make Measurements RIGOL
DS1000Z User’s Guide
6-69
To Clear the Measurement
If you have currently enabled one or more items in the 32 measurement parameters,
you can “Delete” or “Recover” the last five parameters enabled.
Note that the last five parameters are determined according to the order in which
you turned them on and they will not change as you delete one or more
measurement items.
Press Measure  Clear  Item n (n=1 to 5) to “Delete” or “Recover” the
specified measurement item. When one measurement item is deleted or recovered,
the measurement result at the bottom of the screen will move one-item left or right.
Press Measure  Clear  All Items to “Delete” or “Recover” all the 5
measurement items enabled last.