User`s guide

RIGOL Chapter 6 To Make Measurements

DS1000Z User’s Guide

6-56

 Press Options to set the start point, end point or turn on or off the inverted

display of the operation results.

Press Start to set the start point of the operation results.

Press End to set the end point of the operation results.

Press Invert to turn the inverted display of the operation results on or off.

Press Smooth to set the width of the smmoth window of the differentiate

operation. The range is from 3 to 201. The smooth window is a rectanglular

window used to add smooth processing to the differentiate operation.

Press Auto Scale to turn on or off the auto scale function. When “ON” is

selected, the instrument will adjust the vertical scale to the best value according

to the current configration automatically.

 HORIZONTAL POSITION and HORIZONTAL SCALE can also be

used to adjust the horizontal position and scale of the operation results.

Tip

Because differentiation is very sensitive to noise, so you can set the “Acquisition

Mode” to “Average”.

Square Root

Calculate the square root of specified signal source point by point and display the

results.

Press MATH  Math  Operator to select “Sqrt”:

 Press Display to turn on or off the square root operation function.

 Press Source to select the desired channels (CH1, CH2, CH3 or CH4).

 Press Offset and use to adjust the vertical offset of the operation result.

 Press Scale and use to adjust the vertical scale of the operation results.