User manual

RIGOL

User‟s Guide for DS1000B Series

2-25

To Display a Reference Waveform

Figure 2-34

Reference waveform display

 Push REF button to show the reference waveform menu.

 Continue Pressing button No.1 to turn on or turn off one to four reference

channels.

 Select a REF channel as the current reference channel from the channels

activated by step 2.

 Continue pressing button No.3 to select a signal source channel from CH1, CH2,

CH3, CH4 and MATH.(If the MATH is not available ,press MATH button to

activate MATH)

 Turn vertical knob , multifunctional knob , vertical knob

to adjust the waveform (derived from step 4) to a suitable position

and expand or express the waveform horizontally to a proper situation.

 Access page 1 of REF menu, Press button No.4 to select the saving location of

REF waveform.

 Access page 2 of REF menu, and then press button No.2 to save the current

waveform on the screen to internal or external memory as a reference

waveform.

NOTE:

The Reference function is not available in X-Y mode.