User manual

RIGOL

User‟s Guide for DS1000B Series

Safety Notices

Review the following safety precautions carefully to avoid any personal injuries or

damages to the instrument and any products connected to it. To avoid potential

hazards, please use the instrument as specified by this manual only.

The instrument should be serviced by Authorized personnel only.

To Avoid Fire or Personal Injury.

Use Proper Power Cord. Use the power cord designed for the instrument and

authorized in your country only.

Ground The Instrument. The oscilloscope is grounded through the grounding

conductor of the power cord. To avoid electric shock the instrument, grounding

conductor(s) must be grounded properly, before making connections to the input or

output terminals of the instrument.

Connect The Probe. The probes‟ ground terminals are at the same voltage level of

the instrument ground. Do not connect the ground terminals to a high voltage.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and marks on the instrument. Follow the user‟s guide for further ratings information

before making connections to the instrument.

Do Not Operate Without Covers. Do not operate the instrument with covers or

panels removed.

Use Proper Fuse. Use the fuse of the type, voltage and current ratings as specified

for the instrument.

Avoid Circuit or Wire Exposure. Do not touch exposed connections and

components when power is on.

Do Not Operate With Suspected Failures. If suspected damage occurs with the

instrument, have it inspected by qualified service personnel before further

operations.

Provide Proper Ventilation. Refer to the installation instructions for proper

ventilation of the instrument.

Do not Operate in Wet/Damp Conditions.