User manual

RIGOL

User‟s Guide for DS1000B Series

1-11

Vertical offset back to 0 shortcut key

Turn the knob to change the vertical display position of

channel and press the knob to set the vertical display position

back to 0 as a shortcut key, this is especially helpful when the trace position is

far out of the screen and want it to get back to the screen center immediately.

2. Change the vertical setup and notice that each change affects the

status bar differently.

 Change the vertical sensitivity with the knob and notice the change

in the status bar at the bottom of the display.

 When you Press CH1, CH2, CH3, CH4, MATH, REF, the operating menus,

symbols, waveforms and status information of corresponding channel and

settings will be displayed on the screen. The current selected channel will be

shut down when you press the key associated with the channel one more time.

Coarse/Fine Shortcut key

The Coarse/Fine vertical control can be set by simply pressing the vertical

knob.