Datasheet

4
Video Trigger
Video Standard
Line Frequency
Support for standard NTSC, PAL and SECAM broadcast systems. Line
number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)
Slope Trigger
Trigger Condition
(
＞
,
＜
, =) Positive slope, (
＞
,
＜
, =) Negative slope
Time Setting
20ns~10s
Alternate Trigger
Trigger on CH1
Edge, Pulse Width, Video, Slope
Trigger on CH2
Edge, Pulse Width, Video, Slope
Pattern Trigger
[2]
Pattern Type
D0~D15 select H, L, X, ,
Duration Trigger
[2]
Pattern Type
D0~D15 select H, L, X
Qualifier
＞
,
＜
, =
Time Setting
20ns~10s
Measurements
Cursor
Manual
Voltage difference between cursors (∆V)
Time difference between cursors (∆T)
Reciprocal of ∆T in Hertz (1/∆T)
Track
Voltage value and time value of waveform point
Auto
Cursors are visible for Automatic Measurement
Auto Measure
Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq,
Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1→2 ,
Delay1→2
Remarks:
[1] Only one channel is available when the Sample rate is 1GSa/s.
[2] For DS1000D Series.