User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
5-3
1-2-5 Sequence
Sample Rate and
Delay Time
Accuracy
± 50ppm (over any 1ms time interval)
Delta Time
Measurement
Accuracy
(Full Bandwidth)
Single-shot: ± (1 sample interval + 50ppm × reading + 0.6
ns)
>16 averages: ± (1sample interval + 50ppm × reading + 0.4
ns)
Vertical
A/D converter
8-bit resolution, each channel samples simultaneously
Volts/div Range
2mV/div~10V/div at input BNC
Maximum Input
Analog channel maximum input voltage
CAT I 300Vrms, 1000Vpk; instantaneous voltage 1000Vpk.
CAT II 100Vrms, 1000Vpk.
CAT II 300Vrms, when use probe RP2200 10:1, RP3200 10:1
or RP3300 10:1.
Offset Range
± 40V (250mV/div~10V/div)
± 2V (2mV/div~245mV/div)
Analog Bandwidth
100MHz (DS1102D,DS1102E)
50MHz (DS1052D, DS1052E)
Single-shot
Bandwidth
100MHz (DS1102D, DS1102E)
50MHz (DS1052D, DS1052E)
Selectable Analog
Bandwidth Limit
(typical)
20MHz
Lower Frequency
Limit (AC –3dB)
≤5Hz (at input BNC)
Rise Time at BNC,
typical
<3.5ns, <7ns,
On (100MHz, 50MHz) respectively
Dynamic range
± 5div
DC Gain Accuracy
2mV/div-5mV/div:
± 4% (Normal or Average acquisition mode)
10mV/div-10V/div:
± 3% (Normal or Average acquisition mode)
DC Measurement
Average of ≥16 Waveforms with vertical position at zero: