User Manual

Chapter 2 Front Panel Operations RIGOL
DP800 User’s Guide 2-51
Preset Setting
Press Utility  Preset to define the setting recalled by Preset at the front panel.
Pressing Preset can restore the instrument to factory setting or recall the
user-defined settings according to the setting of Preset Key.
Restore to factory setting
Press Utility  Preset to enter the interface as shown in the figure below and by
default, “Default” is selected; at this point, pressing Preset at the front panel will
restore the instrument to factory setting as shown in Table 2-2. Press Preset Key
repeatedly to select the 4 groups of user-defined settings. For details, refer to the
introduction in “Recall the user-defined setting”.
Figure 2-14 Preset Value Type Selecting Interface
Table 2-2 Factory Setting
Parameter
Factory Setting
Channel Parameters
DP832
CH1 Voltage/Current Setting Values 00.00V, 3.000A
CH2 Voltage/Current Setting Values
00.00V, 3.000A
CH3 Voltage/Current Setting Values
0.00V, 3.000A
CH1 Voltage/Current Limits 33.00V, 3.300A
CH2 Voltage/Current Limits 33.00V, 3.300A
CH3 Voltage/Current Limits 5.50V, 3.300A
CH1 OVP\OCP On/Off
Off/Off
CH2 OVP\OCP On/Off
Off/Off
CH3 OVP\OCP On/Off
Off/Off
CH1 Track On/Off Off