Programming Guide

Chapter 2 Command System RIGOL

DP800 Programming Guide 2-29

:MONItor:VOLTage:CONDition

Syntax :MONItor:VOLTage:CONDition {<V|>V|NONE},{AND|OR|NONE}

:MONItor:VOLTage:CONDition?

Description Set the voltage monitor condition of the monitor.

Query the voltage monitor condition of the monitor.

Parameter

Name Type Range Default

{<V|>V|NONE} Discrete <V|>V|NONE NONE

{AND|OR|NONE} Discrete AND|OR|NONE NONE

Explanation  After setting the voltage monitor condition, sending

the

:MONItor:VOLTage[:VALue] <value> command can set the voltage value.

 You can set the voltage monitor condition to “<Volt” ot “>Volt”.

 The actual monitor condition is the logic combination of the voltage, current

and power. You need to set the logic relation between the voltage monitor

condition and the current/power monitor conditions; you can set the logic

relation to “AND”, “OR” or “None”; wherein, “None” indicates that no logic

relation will be set.

Return Format The query returns “condition,logic relation”, for example, <V,AND.

Example :MONI:VOLT:COND <V,AND /*Set the voltage monitor condition to “<Volt” and

logic relation to “AND”*/

:MONI:VOLT:COND? /*Query the current voltage monitor condition and

the query returns <V,AND*/

Commands

:MONItor:CURRent:CONDition

:MONItor:CURRent[:VALue]

:MONItor:POWER:CONDition

:MONItor:POWER[:VALue]

:MONItor:VOLTage[:VALue]