Quick Start Guide
RIGOL
DP800A Quick Guide 15
3. Dial Display Mode
Press Display Mode “Dial” to set the display mode to dial display mode as
shown in the figure below. This mode displays the voltage, current and power of
the currently selected channel in both number and dial formats and you can
directly view the values and variations of the voltage, current and power of the
channel currently selected. In this mode, you can set the voltage and current of
the channel currently selected using the numeric keyboard or knob.
Figure 7 Dial Display Mode
Tip
When the current display mode is “Normal” or “Wave”, press at the front
panel to switch between the current display mode and dial display mode.