Quick Start Guide
RIGOL
DP800A Quick Guide 13
Display Mode
DP800A series power supply provides three kinds of display modes (normal,
waveform and dial). In the following part, DP831A is taken as an example for
illustration.
1. Normal Display Mode
After start-up, the instrument enters the normal display mode by default as
shown in the figure below. This mode displays the voltages, currents and
powers of all channels in number format. You can set the voltage, current and
overvoltage/overcurrent protection parameters of the channel currently selected.
You can also enable or disable the track function if the current channel supports
the track function.
Figure 5 Normal Display Mode