User manual

RIGOL Chapter 2 Front Panel Operations
2-40 DP800A User’s Guide
Utility
Press Utility at the front panel to enter the interface as shown in the figure below.
This interface displays the current system parameters.
Figure 2-12 Utility Interface
1. I/O Config: set the LAN, RS232 and GPIB (option, extended using the USB to
GPIB interface converter) interface parameters.
2. System: set the system parameters, such as the beeper and screen saver.
3. Sys Info: view system information, such as the device model and serial
number.
4. Language: set the system language.
5. Test/Cal: view the self-test information and calibrate the instrument manually.
6. Print Set: print the screen content into the USB storage device.
7. Preset: users can define the setting recalled by Preset at the front panel.
8. Option: install the option or view the current option installation information of
the instrument.