User manual

Index RIGOL
DP800A User’s Guide 1
Index
Advanced Functions .................. 2-21
All File ..................................... 2-38
Analyzer................................... 2-24
Annual Accuracy .................. 5-1, 5-3
Appearance and Dimensions ........ 1-3
Auto IP .................................... 2-45
Back .......................................... 1-7
Base Val and Step ..................... 2-19
Brightness ................................ 2-34
Built-in help system ................... 1-19
Channel Selection ....................... 1-5
Check the output mode ............... 2-3
Command Processing Time ... 5-1, 5-3
Connect the output terminals ....... 2-3
Constant current output .............. 2-4
Constant voltage output .............. 2-2
Contrast ................................... 2-34
Control Source .......................... 2-31
Create the timer parameters ...... 2-15
Data Line ................................. 2-30
DC Output ........................... 5-1, 5-3
Decline .................................... 2-19
Delay File ................................. 2-38
Delayer ...................................... 2-7
Delayer parameter setting ......... 2-17
DHCP....................................... 2-44
Dial Display Mode ..................... 1-17
Display Mode Switch ................. 1-10
Display Setting ......................... 2-34
DNS Server .............................. 2-46
Edit the templet parameters ....... 2-14
Enable ............................. 2-30, 2-33
Exp Fall .................................... 2-13
Exp Rise .................................. 2-12
FixTime.................................... 2-19
Front Panel ................................ 1-4
Function Menu Area .................... 1-9
GPIB ........................................ 2-49
Hardware Flow Control .............. 2-49
I/O Configuration ...................... 2-44
Increase .................................. 2-19
Input power requirement ........... 1-13
IP Configuration Mode ............... 2-44
LAN Status ................................ 2-44
LCD .......................................... 1-5
Linear Regulation Rate .......... 5-1, 5-3
Load Regulation Rate ............
5-1, 5-3
MAC Address ............................ 2-45
Manual IP ................................. 2-45
Mean deviation ......................... 2-24
Median ..................................... 2-24
Menu Keys ................................ 1-10
Mode ....................................... 2-24
Monitor .................................... 2-27
Noise .................................. 5-1, 5-3
Normal Display Mode ................. 1-15
Ok ............................................ 1-7
On Delay/Off Delay .................... 2-19
Output Response ....................... 2-30
Output Signal ............................ 2-32
Output Terminals ........................ 1-8
Parameter Input Area ................. 1-6
Polarity ..................................... 2-32
Power Switch Key ...................... 1-10
Preset ....................................... 1-7
Pulse ........................................ 2-10
Ramp ....................................... 2-11
Range ...................................... 2-24
Rear Panel ................................ 1-12
Record File ............................... 2-38
Record period ........................... 2-22
Recorder .................................. 2-22
Resolution ........................... 5-1, 5-3
RGB Luminance ......................... 2-34
Ripples ................................ 5-1, 5-3
Sensitivity ................................. 2-30
Set the current ........................... 2-2
Set the Gateway ........................ 2-46
Set the IP Address ..................... 2-46
Set the overcurrent protection ..... 2-2
Set the Subnet Mask .................. 2-46
Set the voltage ........................... 2-2
Sine ......................................... 2-10
Source under Control ................. 2-30
Stability ............................... 5-1, 5-3
Stair Dn .................................... 2-12