User manual
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DP800 Series Overview
- Document Overview
- Quick Start
- Front Panel Operations
- Constant Voltage Output
- Constant Current Output
- Power Supply Series and Parallel Connections
- Track Function
- Sense Working Mode
- Timer and Delayer
- Advanced Functions
- Display Setting
- Store and Recall
- Utility
- Key Locking
- Remote Control
- Troubleshooting
- Specifications
- Appendix
- Index
RIGOL Chapter 2 Front Panel Operations
2-62 DP800 User’s Guide
Preset Setting
Press Utility Preset to define the setting recalled by Preset at the front panel.
Pressing Preset can restore the instrument to factory setting or recall the
user-defined settings.
To Restore to Factory Setting
Press Utility Preset to enter the interface as shown in the figure below. Press
Preset Key to select "Default" or any of the 4 groups of user-defined settings and
by default, "Default" is selected. When "Default" is selected, pressing Preset at the
front panel will restore the instrument to factory setting as shown in Table 2-2 on the
next page.
Figure 2-15 Preset Value Type Selecting Interface