Manualshelf

User manual

ManualsBrandsRIGOL ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) 0.01 - 50 V 0.01 - 3 A
51525354555657585960
Chapter 3 Application Instances RIGOL
DP700 Programming Guide 3-1
Chapter 3 Application Instances
This chapter provides the application instances of the SCPI commands. The main functions of the power
supply can be realized through a series of SCPI commands.
Note:
1. The instances in this chapter take DP711 as an example. The range of certain parameters for other
models may be different. Therefore, you need to adjust the parameter range for the model that you
use if necessary.
2. Before using the instances in this chapter, refer to
To Build Remote Communication to set up remote
communication between the power supply and the PC. In addition, you have to install Ultra Sigma or
other PC software that can be used to send commands.
3. In each instance, every command is followed by contents enclosed by two slashes (“/*” and “*/”).
They are the descriptions of the command and not part of the command, which help you understand
the command better.
Contents in this chapter:
Constant Voltage Output
Timing Output