User manual

RIGOL Chapter 2 Command System

2-42 DP700 Programming Guide

:TIMEr:ENDState

Syntax

:TIMEr:ENDState <state>

:TIMEr:ENDState?

Description

Sets the end state of the timer.

Queries the end state selected for the timer.

Parameter

Name Type Range Default

<state> Discrete {OFF|LAST} OFF

Remarks

 "End State" refers to the state of the instrument after it has completed outputting groups of voltage

and current values for a specified number of times (the total number of output groups) when "cycles"

is N[,<value>] (a finite value). When "cycles" is set to I (Infinite), "End State" is invalid.

 <state>:

OFF: indicates that the output will be turned off automatically after the output is completed.

LAST: keeps the output state (voltage/current) of the last group after the output is completed.

 Total Number of Output Groups for the Timer = Outp Groups x Cycles. Wherein, for "Outp Groups",

refer to the

:TIMEr:GROUPs command; for "Cycles", refer to the :TIMEr:CYCLEs command.

Example

:TIMEr:ENDState LAST /*Sets the end state of the timer to "LAST"*/

:TIMEr:ENDState? /*Queries the end state selected for the timer*/

Return Format

OFF or LAST

Related Commands

:TIMEr:CYCLEs

:TIMEr:GROUPs

Syntax

:TIMEr:GROUPs <value>

:TIMEr:GROUPs?

Description

Sets the number of output groups.

Queries the number of output groups selected for the timer.

Parameter

Name Type Range Default

<value> Integer 1 to 2048 1

Remarks

 "Outp Groups" indicates the number of groups of the preset voltage and current values that the

instrument outputs in each cycle.

 Total Number of Output Groups for the Timer = Outp Groups x Cycles. Wherein, for "Outp Groups",

refer to

:TIMEr:GROUPs.

 After the instrument has completed outputting operation for a specified number of times (total number