User manual

RIGOL
II DP700 Programming Guide
Document Overview
This manual is your guide to programming the RIGOL DP700 series programmable linear DC power supply.
Main Topics in this Manual:
Chapter 1 Programming Overview
This chapter introduces how to set up remote communication between the power supply and the PC, the
remote control methods, the syntax, symbols, parameters, and abbreviation rules of the SCPI commands.
Chapter 2 Command System
This chapter introduces the syntax, function, parameters, and usage of each command.
Chapter 3 Application Instances
This chapter provides some application instances of the basic functions of the power supply. Each
application instance is composed of a series of commands, which are used to realize the specified basic
function.
Chapter 4 Programming Examples
This chapter illustrates how to control the DP700 series by programming in LabVIEW and Visual C#.
Chapter 5 Appendix
This chapter provides default settings and warranty information for the DP700 series.
Tip
For the latest version of this manual, download it from the official website of
RIGOL
(www.rigol.com).
Format Conventions in this Manual:
Key
(1) The key on the front panel is denoted by the format of “Key Name (Bold) + Text Box” in the manual.
For example, On/Off denotes the "On/Off" key.
(2) Use the screen shot to indicate the key. For example, denotes the Power key.
Content Conventions in this Manual:
DP700 series programmable linear DC power supply includes the following models. Unless otherwise
specified, this manual takes DP711 as an example to make a detailed introduction about the commands of
the DP700 series, and lists some application instances and programming examples of DP711.
Model No. of Channels Output Voltage/Current
DP711 1 30 V/5 A
DP712 1 50 V/3 A