User manual

Chapter 2 Command System RIGOL
DP700 Programming Guide 2-23
[:SOURce[<n>]]:CURRent:PROTection:CLEar
Syntax
[:SOURce[<n>]]:CURRent:PROTection:CLEar
Description
Clears the internal OCP flag and the OCP prompt message.
Parameter
Name Type Range Default
<n> Discrete {1} 1
Remarks
 Before executing the command, ensure that you have located and resolved the problem for causing
the overcurrent protection. To resolve the problem, reduce the output current to below the overcurrent
protection value or increase the overcurrent protection value to above the output current value.
Executing the command will clear the internal OCP flag and the OCP prompt message.
 You can send the
:OUTPut:OCP:CLEAR command to clear the internal OCP flag and the OCP prompt
message.
 You can also send the
:OUTPut:OCP:ALAR?, :OUTPut:OCP:QUES?, or
[:SOURce[<n>]]:CURRent:PROTection:TRIPped? command to query whether the overcurrent
protection has currently occurred.
Example
CURRent:PROTection:CLEar /*Clears the internal OCP flag and the OCP prompt message*/
Related Commands
:OUTPut:OCP:CLEAR
:OUTPut:OCP:ALAR?
:OUTPut:OCP:QUES?
[:SOURce[<n>]]:CURRent:PROTection:TRIPped?
[:SOURce[<n>]]:CURRent:PROTection[:LEVel]
Syntax
[:SOURce[<n>]]:CURRent:PROTection[:LEVel] {<value>|MINimum|MAXimum}
[:SOURce[<n>]]:CURRent:PROTection[:LEVel]? [MINimum|MAXimum]
Description
Sets the channel overcurrent protection (OCP) value.
Queries the overcurrent protection (OCP) value for the channel.
Parameter
Name Type Range Default
<n> Discrete {1} 1
<value> Real
Standard: 0.01 A to 5.5 A
High resolution option (ordering number:
HIRES-DP700) installed: 0.001 A to 5.5 A
5.3 A
Remarks
 If the overcurrent protection function is enabled and the current of the output terminal equals to the
currently set overcurrent protection value, then the internal OCP flag is set to 1, and a message is
displayed on the screen, prompting you that overcurrent protection occurs and the channel output is
automatically disabled.
 For the setting command, MINimum indicates setting the channel overcurrent protection to a minimum
value; MAXimum indicates setting the channel overcurrent protection to a maximum value.