User manual

Chapter 2 Command System RIGOL
DP700 Programming Guide 2-3
:DISPlay Command
The :DISPlay command is used to turn on or off the display.
:DISPlay[:WINDow][:STATe]
Syntax
:DISPlay[:WINDow][:STATe] <state>
:DISPlay[:WINDow][:STATe]?
Description
Turns on or off the display.
Queries the on/off state of the display.
Parameter
Name Type Range Default
<state> Bool {ON|OFF} ON
Remarks
Only when DP700 is in remote mode, can the :DISPlay:WINDow:STATe OFF command be valid. After you
turn off the display, if DP700 returns to the local mode, the display is automatically on.
Example
:DISPlay ON /*Turns on the display*/
:DISPlay? /*Queries the on/off state of the display*/
Return Format
ON or OFF
Related Command
:SYSTem:LOCal