Datasheet
OVP/OCP
Accuracy, ±(% of Output + Offset) 0.5% + 0.5 V/0.5% + 0.5 A
OVP Activation Time <10 ms (OVP>1 V)
Voltage Programming Speed
[3]
(within 1% of the total variation range)
Up
Full Load 150 ms
No Load 100 ms
Down
Full Load 30 ms
No Load 450 ms
Temperature Coefcient
[4]
, ±(% of Output + Offset)
Voltage 0.01% + 2 mV
Current 0.02% + 3 mA
Stability
[5]
, ±(% of Output + Offset)
Voltage 0.02% + 2 mV
Current 0.1% + 3 mA
Mechanical
Dimensions 140 mm (W) x 202mm (H) x 332 mm (D)
Weight Net weight: 6.9 kg
Power
AC Input Power (50 Hz to 60 Hz) 100 Vac ± 10%, 120 Vac ± 10%, 220 Vac ± 10%, and 240 Vac ± 10% (max: 253 Vac)
Maximum Input Power 400 VA
Interface
RS232 1 (Male)
Environment
Cooling Method Fan cooled
Operating Temperature 0°C to 40°C for full rated output
Maximum Output Floating Voltage to
Ground
±240 Vdc
Storage Temperature -40°C to 70°C
Humidity 5% to 80% RH
Altitude Below 2,000 m
Note
[
1
]
: The accuracy parameters are acquired through calibration under 25°C after 1-hour warm-up.
Note
[2]
: The maximum time required for the output to begin to change after receiving the APPLy and SOURce commands.
Note
[3]
: Exclude the command processing time.
Note
[4]
:
Maximum change in output/readback per °C after a 30-minute warm-up.
Note
[5]
: Following a 30-minute warm-up, change in output over 8 hours under constant load, line, and ambient temperature.