User manual

Chapter 2 Front Panel Operations RIGOL
DP700 User’s Guide 2-39
The SCPI commands can be sent to the DP700 series power supply by user-defined
programming or PC software. For details, refer to the descriptions in "Remote
Control".
Brief Descriptions of Commands
 The angle-bracket < >, brace { }, and vertical bar | are not part of the
command, and they are not sent with the commands, but taken as
delimiters to better describe the parameters in the command. When sending
the command, the parameter enclosed in the angle-bracket must contain an
effective value. The contents enclosed in the braces can contain multiple
parameter options; and the vertical bar is used to separate multiple
parameter options. When sending the command, you must select one of the
parameters.
 The letters in the commands are case-insensitive. The commands can be
input in uppercase letters or in lowercase letters. For abbreviations, you
must enter all the uppercase letters that exist in the command syntax. For
example, :SYSTem:KLOCk? MEMORY can be abbreviated as :SYST:KLOC?
MEMORY.
 The contents in /*...*/ are explanations for the command.
For details about the SCPI commands, refer to
DP700 Programming Guide .