User manual

Chapter 2 Front Panel Operations RIGOL
DP700 User’s Guide 2-35
Option Configuration
DP700 series power supply provides the following options:
 Trigger: provides the trigger input and output functions.
 Timer: outputs based on the preset voltage and current values.
 High Resolution: improves the resolution of the instrument.
If you need any of these options, order them according to the Order No. available in
"Appendix A: Order Information", and then install the options according to this
section.
Press System to enter the system utility function interface. Press the Left/Right
arrow key or use the knob to select the "Option" tab.
Figure 2-10 System Option Tab
In the system option tab, you can view the installation status of all options (Official,
Trial, Not Installed) and install the options.
To install an option, you need an option license (each instrument has a unique
license). The option license is a 28-character string, which consists of English letters
and numbers. After you purchase an option, you will obtain a key (used for obtaining
the option license). Then, you can install the option according to the following steps.
1. Obtain an option license
(1) Log in to the RIGOL official website (
www.rigol.com), click SERVICE 
Software License Register to enter the "Registered product license
code" interface.
(2) In the interface, enter the correct key, serial number (press System, and
select the "Info." tab to obtain the serial number of the instrument), and
verification code. Then click Generate to obtain the option license.
Note: The hyphens in the option license should be omitted.