Manualshelf

User manual

ManualsBrandsRIGOL ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) 0.01 - 50 V 0.01 - 3 A
61626364656667686970
Chapter 2 Front Panel Operations RIGOL
DP700 User’s Guide 2-29
Trigger Input:
In the system setting tab, press the Up/Down arrow key to switch the parameter
focus to "Trig In", and then press the Left/Right arrow key or use the knob to enable
or disable the trigger input function.
Trigger Output:
In the system setting tab, press the Up/Down arrow key to switch the parameter
focus to "Trig Out", and then press the Left/Right arrow key or use the knob to
enable or disable the trigger output function.
Tip
If the trigger option is not installed, you can enable neither the trigger input nor
the trigger output function.