User manual

Chapter 2 Front Panel Operations RIGOL
DP700 User’s Guide 2-27
System Setting
Press System to enter the system utility function interface. By default, the "Setting"
tab is selected. You can also press the Left/Right arrow key or use the knob to select
the system setting tab.
Figure 2-5 System Setting Tab
In the system setting tab, you can select system language, select power-on setting,
set screen brightness, turn on/off the beeper and the screen saver, and turn on/off
trigger input or output.
Select the System Language
DP700 series power supply provides the help information, prompt message, and
interface display in both Chinese and English version.
In the system setting tab, press the Up/Down arrow key to switch the parameter
focus to "Language", and then press the Left/Right arrow key or use the knob to
select the desired language: Chinese or English.
Select Power-on Setting
Select "Default" or "Last" as the power-on setting.
 Default: restores defaults when the instrument is powered on, refer to Table 2-3.
 Last: restores its last state when the instrument is powered on.
In the system setting tab, press the Up/Down arrow key to switch the parameter
focus to "Power-on", and then press the Left/Right arrow key or use the knob to
select the desired power-on state: Default or Last.