User manual

RIGOL Chapter 2 Front Panel Operations
2-20 DP700 User’s Guide
Store and Recall
DP700 series power supply allows you to save the instrument status or timer
parameters to the internal NVM, and recall them if necessary. Besides, you can
restore the instrument to default settings and clear the saved state files and timer
files.
Press Memory to enter the store and recall interface, as shown in the figure below.
Figure 2-2 Store and Recall Interface
Table 2-2 Store and Recall Interface Description
No.
Name
Description
1 State1 to State10
Indicates the storage location of the state
file. The state file is used to store the current
state information of the instrument, including
but not limited to parameter and system
status.
2 Timer1/Timer2
Indicates the storage location of the timer
file. The timer file is used to store timer
parameters, including the number of output
groups, the number of cycles, trigger mode,
end state, output voltage, output current,
and duration time.
3 Restore default setting
Restores the instrument settings to defaults
(refer to Table 2-3).
4 Clear all saved files
Clears all saved state files and timer files in
the internal NVM.