User manual

Chapter 1 Quick Start RIGOL
DP700 User’s Guide 1-13
Table 1-1 Main Interface Description
No.
Name
Description
1 Actual Output Mode
Displays the channel output mode in real time: CV
(constant voltage), CC (constant current), or UR
(unregulated).
2 Actual Output Status
Displays the actual output status of the channel in
real time, including the actual output voltage (V),
the actual output current (A), and the actual output
power (W).
3 Help Information
Displays the help information of the current
interface in real time, including the interface
description, operation method, etc.
4 Output Setting
Sets the channel output parameters, including
output voltage, output current, the on/off status of
overvoltage protection, overvoltage protection
setting value, the on/off status of overcurrent
protection, and overcurrent protection setting
value.
5 System Status Icons
: indicates that the overtemperature
protection occurred.
: indicates that the front panel has been
locked.
: indicates that the beeper is off.
: indicates that the beeper is on.
: indicates that the instrument is remotely
controlled.
Tip
 Press Timer to enter the timer interface. At this time, the Timer key is
illuminated. Then, pressing Timer again will return to the main interface.
 Press System to enter the system utility function interface. If the Timer key
is not illuminated, pressing System again will return to the main interface; if
the Timer key is illuminated, pressing System again will return to the timer
interface.
 Press Memory to enter the store and recall interface. If the Timer key is not
illuminated, pressing Memory again will return to the main interface; if the
Timer key is illuminated, pressing Memory again will return to the timer
interface.