User manual

Chapter 1 Quick Start RIGOL
DP700 User’s Guide 1-11
the standard of the destination country. For fuse replacement, refer to "Fuse
Replacement".
6. Fuse Rating
List the input voltage and its matched fuse specification.
7. AC Selector
Select the voltage rating that matches the actual AC input power. For the
matching relationship, refer to "Fuse Rating" on the rear panel or Table 1-2.
When the switch lever (including the top switch lever and the bottom switch
lever) is located at a different position, it indicates that a different voltage rating
is selected. For example, in the following figure, 220 Vac is selected.
AC SELECTOR
100Vac 120Vac 220Vac 240Vac
Switch Lever (Top)
Switch Lever (Bottom)
Position of the switch lever and its
corresponding indicated voltage