User manual

Chapter 1 Quick Start RIGOL

DP700 User’s Guide 1-7

Connection Methods for the Output

Terminals:

Method 1:

Connect the test lead to Position A of the

output terminal.

Method 2:

Rotate the outer nut of the output terminal

counterclockwise and connect the test lead to

Position B of the output terminal; then, rotate

the outer nut of the output terminal clockwise

and fasten it firmly.

The second connection method can avoid the

error arising from the resistance of the output

terminal. Method 2 is recommended when

the output current of the channel is relatively

greater.

6. Arrow Keys and Confirmation Key

mA A

Note: Pressing arrow keys or OK in different

interfaces can produce different operation results.

Here introduces their common usage. As for their

other functions and usages, refer to the detailed

introduction described in later sections of the

manual. You can also refer to the help information

at the bottom of the instrument interface.

6.1 Arrow keys (Up/Down/Left/Right key)

(1) Switch the parameter focus.

(2) Move the cursor.

(3) Switch the parameters or parameter values.

(4) Select the voltage/current unit.

Press the Up/Down arrow key to select V/mV as the voltage unit; press

the Left/Right arrow key to select mA/A as the current unit.

(5) Switch the tab.

Press System to enter the system utility function interface, and press

the Left/Right arrow key to select different tabs.