User manual

RIGOL
12 DP700 Quick Guide
English
Remote Control
DP700 series power supply can be connected to the PC via the RS232 interface
to set up communication and realize remote control through the PC. The
remote control can be realized by using SCPI (Standard Commands for
Programmable Instruments) commands. DP700 series power supply supports
two ways of remote control: user-defined programming and PC software (e.g.
RIGOL Ultra Sigma).
When the instrument is in remote control, the icon is displayed on the user
interface. The keys on the front panel are locked (except , On/Off, and
). At this time, you can press to exit the remote mode.
More Product Information
1. Obtain the device information
Press System, and then press the Left/Right arrow key or use the knob to
select the "Info." tab. Then, you can obtain the device information,
including the device model, serial number, and software version.
2. Check the option installation
Press System, and then press the Left/Right arrow key or use the knob to
select the "Option" tab. Then, you can check the installation status of all
the options.
For more information about this instrument, refer to the relevant manuals by
logging in to the official website of RIGOL (www.rigol.com) to download them.
DP700 User's Guide : introduces the functions of the instrument and the
operation methods, remote control methods, possible failures and solutions in
using the DP700 series power supply, specifications, and order information;
DP700 Programming Guide : provides detailed descriptions of SCPI commands
and programming instances of the instrument.
DP700 Datasheet : provides the main features and technical specifications of
the instrument.