User manual

RIGOL
DP700 Quick Guide 11
English
Setting Methods for Output Voltage/Output Current:
Method 1:
(1) Press the Up/Down arrow key to switch
the parameter focus to "Voltage
Setting Value" or "Current Setting
Value".
(2) Enter a value by using the num key.
While entering a value, press to
delete the unwanted character if
necessary.
(3) When setting the output voltage, press the Up arrow key or OK to set
the voltage unit to V; or press the Down arrow key to set the voltage
unit to mV. When setting the output current, press the Left arrow key to
set the current unit to mA; or press the Right arrow key or OK to set
the current unit to A.
Method 2:
(1) Press the Up/Down arrow key to switch the parameter focus to "Voltage
Setting Value" or "Current Setting Value".
(2) Press the Left/Right arrow key to move the cursor to a desired position.
(3) Rotate the knob to modify the value.
Current
Setting Value
Voltage
Setting Value