User manual

RIGOL Chapter 2 Command System
2-8 DP700 Programming Guide
:LIC Command
The :LIC command is used to install the options. DP700 series provides the following options: Trigger, Timer,
and High Resolution. If you need any options, please purchase them and install them properly.
 Trigger: provides the trigger input and output function; the order No. is TRIGGER-DP700.
 Timer: outputs based on the preset voltage and current values; the order No. is TIMER-DP700.
 High Resolution: improves the resolution of the instrument; the order No. is HIRES-DP700.
:LIC:SET
Syntax
:LIC:SET <license>
Description
Installs an option.
Parameter
Name Type Range Default
<license> ASCII String Refer to Remarks --
Remarks
To install an option, you need an option license (<license>, and each instrument has a unique license). The
option license is a 28-character string, which can only consist of English letters and numbers. After you
purchase an option, you will obtain a key (used for obtaining the license). Then, you can install the option
according to the following steps.
1. Obtain the option license
(1) Log in to the RIGOL official website (
www.rigol.com), click SERVICE  Software License
Register to enter the "Registered product license code" interface.
(2) In the interface, enter the correct key, serial number (press System, and select the "Info." tab to
obtain the serial number of the instrument), and verification code. Then click Generate to obtain
the option license for the parameter <license>.
Note: The hyphens in the option license should be omitted for the parameter <license>.
2. Install the option
Send the :LIC:SET <license> command to install the option.
Example
:LIC:SET 4SN2M2HBB2H4PLHTJFM4PFCEUAVB
Related Command
*OPT?