Information

Chapter 5 Specifications RIGOL
DP700 User’s Guide 5-3
Maximum Output Floating
Voltage to Ground
±240 Vdc
Storage Temperature -40°C to 70°C
Humidity 5% to 80% RH
Altitude Below 2,000 m
Note
[1]
: The accuracy parameters are acquired through calibration under 25°C after 1-hour
warm-up.
Note
[2]
: The maximum time required for the output to begin to change after receiving the APPLy
and SOURce commands.
Note
[3]
: Exclude the command processing time.
Note
[4]
: Maximum change in output/readback per °C after a 30-minute warm-up.
Note
[5]
: Following a 30-minute warm-up, change in output over 8 hours under constant load,
line, and ambient temperature.