User Guide

Chapter 2 Front Panel Operations RIGOL
User’s Guide for DP1308A
2-5
4. Set the current
Press Curr and set the current to 5 A.
Figure 2-3 Set the current
5. Connect the output lead
Connect the output terminal of+6V as the following figure:
Figure 2-4 Connect the terminal of +6V
CAUTION
Wrong connection may lead damages to the instrument or the equipment
connected to.
6. Turn on the output
Press the On/Off button below +6V button, and which will be lightened during the
output until you press again.
!