User Guide

Chapter 2 Front Panel Reference RIGOL
User’s Guide for DP1116A
2-23
Utility Settings
Press Utility, the backlight of this key goes on and the instrument enters the
associated system setting interface, see figure below:
Figure 2-17 System setting interface
Table 2-3 The System setting interface explanations
Menu
Explanation
I/O
Set or reset the LAN parameter, view the ID number of the
USB device, set the GPIB address.
Set the parameters about the system, including Language,
Power-on value, Screen brightness, Overtemperature, Beeper,
Self-test and view the system information.
Calibrate
Enter the calibration interface.
TimerSet
Set the timing output parameters about the channel.
Exit
Exit the Utility function.