Specifications

RIGOL
Programming Guide for DM3058
5-94
Function:
The command sets or queries the static DNS address.
Parameters:
Name
Type
Range of Values
Default
<address>
ASCII
character
string
―nnn.nnn.nnn.nnn‖
The range of ―nnn‖ is
0~255.
―0.0.0.0‖
Explanations:
SYSTem:COMMunicate:LAN:DNS□"<address>": Set the static DNS address.
SYSTem:COMMunicate:LAN:DNS?□[{CURRent|STATic}]: Query the static DNS
address. ―CURRent‖ denotes current DNS address, ―STATic‖ denotes static DNS
address.
If DHCP is ON, the multimeter will try to obtain an IP address from DHCP. If a
DHCP is found, it will assign a dynamic IP address, Subnet Mask, and Default
Gateway to the instrument.
When DHCP is OFF, the multimeter will use the static IP address, Subnet Mask,
and Default Gateway during power-on.
Return Format:
The query returns the static DNS address.
8. SYSTem:COMMunicate:LAN:DOMain
Command Format:
SYSTem:COMMunicate:LAN:DOMain□"<name>"
SYSTem:COMMunicate:LAN:DOMain?□[{CURRent|STATic}]
Function:
The command sets or queries current domian name of instrument.