-1-
Guaranty and Declaration Copyright © 2018 RIGOL (SUZHOU) TECHNOLOGIES INC. All Rights Reserved. TrademarkInformation RIGOL is a registered trademark of RIGOL (SUZHOU) TECHNOLOGIES INC. PublicationNumber QGB11100-1110 Notices RIGOL products are covered by P.R.C. and foreign patents, issued and pending. RIGOL reserves the right to modify or change parts of or all the specifications and pricing policies at the company’s sole decision.
CAUTION Indicates a potentially hazardous situation or practice which, if not avoided, could result in damage to the product or loss of important data. SafetyTerms on the Product: DANGER WARNING CAUTION It calls attention to an operation, if not correctly performed, could result in injury or hazard immediately. It calls attention to an operation, if not correctly performed, could result in potential injury or hazard.
Format Conventions in this Manual 1. Keys: The keys on the front panel are usually denoted by the format of "Key Name (Bold) + Text Box". For example, Utility. 2. Menu Labels: The menu labels are usually denoted by the format of "Menu Word (Bold) + Character Shading". For example, System Setting. 3. Connectors: The connectors on the front or rear panel are usually denoted by the format of "Connector Name (Bold) + Square Brackets (Bold)". For example, [Counter]. 4.
Product Overview As a multi-functional signal generator, DG800 series function/arbitrary waveform generator integrates many instruments into 1, such as function generator, arbitrary waveform generator, noise generator, pulse generator, harmonic generator, analog/digital modulator, and frequency counter.
Table 2 Rear Panel Description No. Description 1 10MHz In/Out Connector 2 CH1 Sync/Ext Mod/Trig/FSK Connector 3 CH2 Sync/Ext Mod/Trig/FSK Connector 6 No. 4 5 6 Description USB HOST USB DEVICE AC Power Cord Connector 5 4 7 8 9 10 1 2 3 Figure 3 User Interface Table 3 User Interface Icons No.
8 Amplitude 9 Offset 10 Phase Displays the amplitude of the current waveform of each channel. Displays the DC offset of the current waveform of each channel. Displays the phase of the current waveform of each channel. To Prepare for Use To Connect to AC Power Please use the power cord provided in the accessories to connect the signal generator to the AC power source, as shown in the figure below.
then press the desired key for the help information. Then, the corresponding help information is displayed. 2. Obtain the common help topics Press Help/Local on the front panel, and then the following interface is displayed below. Tap "Help" to enter the help interface. At this time, you can tap on the touch screen to move up and down the help items or rotate the knob to scroll up and down the list to select the desired help item. Then, the help information for the item is displayed in the interface. 3.
5. Set offset voltage: Tap the Offset parameter input field to input 500 with the pop-up numeric keypad, and then select "mVdc" as the unit. Tap "Ok". 6. Set start phase: Tap the Phase parameter input field to input 90 with the pop-up numeric keypad, and then select "°" as the unit. Tap "Ok". 7. Enable channel output: Press Output1 or tap the channel output configuration status bar to enable the channel output.
