User manual

RIGOL Chapter 2 Command System
2-74 DG800 Programming Guide
 [:SOURce[<n>]]:FUNCtion:RS232:STOPBit
 [:SOURce[<n>]]:FUNCtion:SEQuence:EDGETime
 [:SOURce[<n>]]:FUNCtion:SEQuence:FILTer
 [:SOURce[<n>]]:FUNCtion:SEQuence:PERiod
 [:SOURce[<n>]]:FUNCtion:SEQuence:SRATe
 [:SOURce[<n>]]:FUNCtion:SEQuence[:STATe]
 [:SOURce[<n>]]:FUNCtion:SEQuence:WAVE
 [:SOURce[<n>]]:FUNCtion[:SHAPe]
 [:SOURce[<n>]]:FUNCtion:SQUare:DCYCle
 [:SOURce[<n>]]:FUNCtion:SQUare:PERiod
[:SOURce[<n>]]:FUNCtion:DUALTone:CENTERFreq
Syntax
[:SOURce[<n>]]:FUNCtion:DUALTone:CENTERFreq {<frequency>|MINimum|MAXimum}
[:SOURce[<n>]]:FUNCtion:DUALTone:CENTERFreq?
Description
Sets the center frequency of the dual-tone signal of the specified channel.
Queries the center frequency of the dual-tone signal of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<frequency>
Real
Refer to "Remarks".
1 kHz
Remarks
 When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
 The center frequency, frequency 1 and frequency 2 satisfy the following relations.
2
21
)( FFF
center
+=
;
Wherein,
center
F
——center frequency;
1
F
——frequency 1;
2
F
——frequency 2.
Return Format
The query returns the center frequency of the dual-tone signal in scientific notation, with 7 effective digits.
For example, 5.000000E+02 (the center frequency is 500 Hz).
Example
:SOUR1:FUNC:DUALT:CENTERF 500/*Sets the center frequency of the dual-tone signal of CH1 to 500 Hz.*/
:SOUR1:FUNC:DUALT:CENTERF? /*Queries the center frequency of the dual-tone signal of CH1 and the
query returns 5.000000E+02.*/