User manual

6
8 Amplitude
Displays the amplitude of the current waveform of each
channel.
9 Offset
Displays the DC offset of the current waveform of each
channel.
10 Phase
Displays the phase of the current waveform of each
channel.
To Prepare for Use
To Connect to AC Power
Please use the power cord provided in the accessories to connect the signal generator to the AC
power source, as shown in the figure below. The rated AC power source supported by the signal
generator is (100-127 V, 45-440Hz) or (100-240 V, 45-65Hz), and its maximum input power shall
not exceed 30 W. When the signal generator is connected to the AC power source via the power
cord, the instrument automatically adjusts itself to within the proper voltage range, and you do
not need to select the voltage range manually.
CAUTION
To avoid electric shock, ensure that the instrument is correctly grounded.
Turn-on Checkout
After connecting the instrument to the power source properly, press on the front panel to
start the signal generator. During the start-up, the instrument will undergo the initialization and
self-check process. Then, it will enter a default interface.
To Set the System Language
DG800 arbitrary waveform generator supports multiple languages. You can press
UtilitySystem Setting, and then select a desired language from the Language drop-down
list.
To Use the Built-in Help System
DG800 series provides the help information for each front-panel function menu and the current
display interface. You can view the help information if you have any questions during the
operation process.
1. Obtain the help information of the front panel keys
To get the help information about the front-panel keys, press the Help/Local key first, and