User manual

3
Format Conventions in this Manual
1. Keys:
The keys on the front panel are usually denoted by the format of "Key Name (Bold) + Text
Box". For example, Utility.
2. Menu Labels:
The menu labels are usually denoted by the format of "Menu Word (Bold) + Character
Shading". For example, System Setting.
3. Connectors:
The connectors on the front or rear panel are usually denoted by the format of "Connector
Name (Bold) + Square Brackets (Bold)". For example, [Counter].
4. Operation Procedures:
"" represents the next step of operation. For example, UtilitySystem Setting indicates
pressing Utility on the front panel and then pressing the menu label System Setting.
Content Conventions in this Manual
DG800 series function/arbitrary waveform generator includes the following models. Unless
otherwise specified, this manual takes DG832 as an example to illustrate the operation methods
of the DG800 series.
Model
No. of Channels
Max. Output Frequency
DG812
2
10 MHz
DG811
1
10 MHz
DG822
2
25 MHz
DG821
1
25 MHz
DG832
2
35 MHz
DG831
1
35 MHz
General Inspection
1. Inspect the packaging
If the packaging has been damaged, do not dispose the damaged packaging or cushioning
materials until the shipment has been checked for completeness and has passed both
electrical and mechanical tests.
The consigner or carrier shall be liable for the damage to the instrument resulting from
shipment. RIGOL would not be responsible for free maintenance/rework or replacement of
the instrument.
2. Inspect the instrument
In case of any mechanical damage, missing parts, or failure in passing the electrical and
mechanical tests, contact your RIGOL sales representative.
3. Check the accessories
Pleasecheck the accessories according to the packing lists. If the accessories are damaged or
incomplete, please contact your RIGOL sales representative.