Manualshelf

User manual

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentMains-powered 10 MHz (max) 1-channel Arbitrary, Triangle, Lorentz curve, Pulse, Noise, Rectangle, Sinus Ma
51525354555657585960
RIGOL Chapter 2 Front Panel Operations
2-28 DG800 User's Guide
DC
DG800 can output DC signal with amplitude range from -10 V to 10 V (HighZ) or from
-5 V to 5 V (when the load is 50 Ω). The figure below shows a sketch of the DC signal.
Press Menu Continuous "DC" to select the DC signal.
Figure 2-6 Sketch of DC signal
Tap the Offset parameter input field to input the desired offset value with the
numeric keypad, then select the unit. Tap "Ok".
You can also use the arrow keys and the knob to set the parameter value: press
down the knob to enter the editing mode, use the arrow keys to move the cursor to
select the digit to be edited, and then rotate the knob to modify the value.