User manual

RIGOL Chapter 2 Front Panel Operations
2-90 DG800 User's Guide
Common Settings
Press Utility on the front panel or tap the icon in the information setting area
at the lower-right corner of the user interface to open the following operation
interface. The interface displays the system parameters of the currently selected
channel.
Figure 2-25 Utility Interface
System Setting
To Set the System Language
At present, DG800 supports menus in multiple languages. Both Chinese and English
are available for the display of the help information, prompt messages, and interface
display. Chinese and English input methods are also supported.
Press Utility  System Setting  Language to select the desired language. This
setting is stored in non-volatile memory and will not be affected by the "restore to
defaults" operation.
Power-on
Selects "Default" or "Last" as the power-on system state. The default setting is
"Default".
 Last: includes all system parameters and states, except channel output state
and clock source.
 Default: denotes the factory defaults except certain parameters (e.g.
Language).
Press Utility  System Setting  Power-on to select the desired configuration
type. This setting is stored in non-volatile memory and will not be affected by the
"restore to defaults" operation.