User manual

Chapter 4 Harmonic Output RIGOL
DG4000 User's Guide
4-5
To Set the Harmonic Phase
After entering the harmonic setting menu, press Phase to set the phase of each
order of harmonic.
1. SN: press this softkey to select the sequence number of the harmonic to be
set.
2. Phase: press this softkey to set the phase of the harmonic selected. Use the
numeric keyboard to input the phase value and then select the unit "°" from
the pop-up menu or use the direction keys and knob to modify the current
value. For the input method of phase value, refer to the introduction in
"Parameter Setting Method".