User manual

RIGOL Chapter 3 Arbitrary Waveform Output
DG4000 User's Guide
3-18
To Edit Arbitrary Waveform
Arbitrary waveforms stored in internal non-volatile memory or external memory
can be edited.
Press Arb and use to open the 2/2 menu page, then press Edit Wform to
open waveform editing menu. Users can also press Edit at the front panel to
quickly open this menu. In this menu, for the functions and operation methods of
the other menus except Select Wform, please refer to "To Create an Arbitrary
Waveform
".
Press Edit Wform  Select Wform to select the waveform to be edited.
1. Edit Built-In waveforms
Select a waveform from the built-in waveforms to edit. You can store the
edited waveform without overwriting the original built-in waveform.
2. Edit Stored Waveforms
Select a waveform from internal non-volatile memory (C Disk) or external
memory (D Disk) to edit. You can overwrite the old waveform or save the new
waveform as a new file.