User manual

Chapter 3 Arbitrary Waveform Output RIGOL
DG4000 User's Guide
3-5
To Select Arbitrary Waveform
DG4000 allows users to select arbitrary waveforms stored in internal or external
memory for output. Press Arb  Select Wform to select "Builtin", "Stored Wforms",
"Volatile Wform" or "DC" for output.
Built-In Waveform
Select from the 150 kinds of built-in arbitrary waveforms of DG4000 as shown in
the table below. Press BuiltIn and select a kind ("Common", "Project", "SectMod,
"Bioelect", "Medical", "Standard", "Maths", "Trigonome", "Anti Trigonome" or
"Window"); the corresponding waveforms are displayed on the interface; use the
knob to select the desired waveform and press Select to select the specified
waveform.
Table 3-1 Built-in Waveform Table
Name Explanation
Common
DC DC signal
AbsSine Absolute value of a Sine
AbsSineHalf Absolute value of half a Sine
AmpALT Gain oscillation curve
AttALT Attenuation oscillation curve
GaussPulse Gauss pulse
NegRamp Negative ramp
NPulse Negative pulse
PPulse Positive pulse
SineTra Sine-Tra waveform
SineVer Sine-Ver waveform
StairDn Stair-down waveform
StairUD Stair-up and stair-down waveform
StairUp Stair-up waveform
Trapezia Trapezoid waveform
Project