User manual

RIGOL Chapter 3 Arbitrary Waveform Output
DG4000 User's Guide
3-2
To Enable Arbitrary Waveform
Press Arb to enable arbitrary waveform function and open the operation menu of
arbitrary waveform.
1. Freq/Period: set the "Freq/Period" of the arbitrary waveform.
2. Ampl/HiLevel: set the "Ampl/HiLevel" of the arbitrary waveform.
3. Offset/LoLevel: set the output "Offset/LoLevel" of the arbitrary waveform.
4. Phase: set the "Start Phase" of the arbitrary waveform.
5. Align Phase: refer to "Align Phase".
6. Point By Point: enable the point by point output mode of arbitrary waveform.
7. Select Wform: select the built-in waveforms, user-defined arbitrary
waveforms stored in the internal or external memory of the instrument,
volatile waveforms or DC.
8. Create New: create a new arbitrary waveform and overwrite the waveform
currently in the volatile memory. Users can define 2pts to 16 kpts arbitrary
waveforms.
9. Edit Wform: edit the waveform currently in the volatile memory.
Refer to "Basic Waveform Output" to configure the parameters and output.
This chapter will focus on "Point By Point", "Select Waveform", "Create New" and
"Edit Waveform".