User manual

Chapter 3 Arbitrary Waveform Output RIGOL
DG4000 User's Guide
3-1
Chapter 3 Arbitrary Waveform Output
DG4000 can output the built-in waveforms and user-defined arbitrary waveforms
from a single channel or from two channels at the same time. The 150 kinds of
built-in waveforms are stored in the internal non-volatile memory. The
user-defined arbitrary waveforms can contain 2 to 16384 (16k) data points,
namely 2pts to 16kpts. Users can edit the user-defined arbitrary waveforms on the
instrument or edit the arbitrary waveforms via the PC software and then download
them to the instrument. Users can also store the user-defined arbitrary waveforms
to the internal non-volatile memory or external memory (USB storage device) of
the instrument and recall them when necessary.
This chapter introduces how to configure the generator to output arbitrary
waveforms.
Subjects in this chapter:
 To Enable Arbitrary Waveform
 Point By Point Output Mode
 To Select Arbitrary Waveform
 To Create an Arbitrary Waveform
 To Edit Arbitrary Waveform