User manual

RIGOL Chapter 1 Quick Start
DG4000 User's Guide
1-20
currently will be highlighted and the lightspot above the number indicates
current cursor location.
7. Offset
Display the current waveform DC offset in each channel. Press the
corresponding softkey Offset and use the numeric keyboard or direction keys
and knob to modify this parameter. The parameter that can be modified
currently will be highlighted and the lightspot above the number indicates
current cursor location.
8. Phase
Display the current waveform phase in each channel. Press the corresponding
softkey Start Phase and use the numeric keyboard or direction keys and knob
to modify this parameter. The parameter that can be modified currently will be
highlighted and the lightspot above the number indicates current cursor
location.
9. Waveform
Display the currently selected waveform shape in each channel.
10. Counter
The brief information of the counter will only be displayed when the frequency
counter function is turned on and the interface currently displayed is not the
frequency counter interface.
 When the statistic function is turned off: only display the frequency and
period.
 When the statistic function is turned on: display the measurement
parameters currently selected, the on/off status of the statistic function,
the measurement values and the number of measurements.
11. Menu
Display the operation menu corresponding to the function currently selected.
For example, the "Sine" function menu is displayed in the above figure.
12. Menu Page Number
Display the total number of pages and the current page number of the menu,
such as "1 of 1" or "1 of 2".